Sunday, December 9, 2012
Purple flowers
In the Holiday Spirit
The tree is up, the decorations are set and I had one table with just a little too much room. Naturally, the solution for that must involve Pinterest and my abundant collection of empty wine bottles. I had seen a picture of a beautiful centerpiece and decided to investigate further. It was a little messier than what I thought it would be but it turned out great!
I used:
Ivory Indoor/Outdoor paint
Three wine bottles
spray adhesive (next time, I'll use Modpodge.... the spray adhesive turned out to be quite messy and one time use)
Epsom salt
A pretty tray
First, I made sure the wine bottles were clean. I tried taking the labels off using a kitchen knife to scrape but I quickly abandoned that idea when I nearly sliced off the tip of my middle finger. That is an important finger, afterall.
Then, since it has been unseasonably warm, I was able to spray paint the bottles outside with the indoor/outdoor paint. I made sure that the can specified the paint was safe to use on glass without a primer. I think I applied 3 or 4 coats, making sure that the paint dried in between applications. Also, it doesn't have to cover perfectly and smoothly. I used a paint with a satin finish and I, even though there were some thine and rough patches, it turns out fine in the end. I then allowed it to dry for another 24 hours.
Next, I laid news paper all over my work space and grabbed a large paper plate from our tailgating supplies. I poured a good amount of epsom salt into the plate. I grabbed my dried wine bottles and sprayed one down with adhesive... very messy business and I'm glad I had plenty of news paper. I then rolled the wine bottle in the salt.
It makes for a very frosty look... I finished by placing the bottles in a silver tray, adding a tall, Christmas scented candle and putting little holiday sprigs in them ($0.50 at Michaels). I also used more epsom salt in the bottom of the tray. It turned out great!
Tuesday, December 4, 2012
December Already?
Blogger is being a little butt while I try to write and upload a post about painting a picture step by step... so we'll save that for another time.
I can't believe its been nearly a month since my last post! But I promise that I have been really busy since then with work events, football games,and holiday stuff. Fortunately, I did take advantage of some spare time I've had after work and on the weekends to paint and do some crafts.
One thing I tried and loved was making coasters. I did a trial run with some old scrap book paper and really liked how it turned out. So, soon after, I made these for a friend's birthday:
They turned out so well, that I decided to make some for our house! Here is how I did it, step by step:
1. Your supplies:
I can't believe its been nearly a month since my last post! But I promise that I have been really busy since then with work events, football games,and holiday stuff. Fortunately, I did take advantage of some spare time I've had after work and on the weekends to paint and do some crafts.
One thing I tried and loved was making coasters. I did a trial run with some old scrap book paper and really liked how it turned out. So, soon after, I made these for a friend's birthday:
They turned out so well, that I decided to make some for our house! Here is how I did it, step by step:
1. Your supplies:
- Paper: I used scrapbook paper that I really liked at Michaels.
- Tile: shower tile is the perfect size. My parents were kind enough to give me some of their extras from when they installed a shower a few years ago.
- Modpodge... yep!
- Sponge brush
- Felt: I used the little felt buttons that have a sitcky side.
- Hot glue gun: used to reinforce the felt buttons.
- Sand paper: just to make sure everything is smooth before you put on the sealer.
- A gloss sealer.
2. Modpodge the paper on to the clean tile after cutting it to the proper size.
| First apply a coat of modpodge to the tile. |
| Give the paper some time to dry until it is stable and won't move around when you modpodge on top of the tile and paper. |
| Apply 4 to 5 coats, allowing it to dry for about 15 minutes in between applications. |
3. After I applied those 4 to 5 coats (quite liberally) I allowed it plenty of time to dry over night. Then, I sanded the edges, making sure they were nice and smooth before wiping them down with a damp cloth.
| Rough edges are inevitable. Just use sand paper to smooth them out. |
4. Once they are smooth and dry, move the tiles on a cardboard surface outside or in a well ventilated room/area. I applied 3 coats of enamel to my tiles, allowing them to dry for about 30 minutes in between coats.
Here is the brand the nice lady at Lowes recommended... It can be used on essentially any surface.
5. Putting on the feet: Once the enamal has dried completely (about an hour), bring it back inside and plug in the hot glue gun!
And that's pretty much it! The only thing left to do is sit back, enjoy a brew and enjoy not damaging your furniture!
Wednesday, November 7, 2012
Lately
Things have been busier than usual and I haven't been able to paint as much as I'd like. Here are some recent paintings that I'v scrounged the time to do.
I actually did take some step by step pictures of this last painting that I will add in my next post.
![]() |
| I painted this one after seeing a similar one that Wilson Bickford painted. I'd like to try it again with some more blending. |
![]() |
| Here is a flowery meadow type impressionistic painting that I did next. |
![]() |
| Here is another similar painting... I love the colors but I feel they aren't as vivid through my crappy camera's lens. |
I actually did take some step by step pictures of this last painting that I will add in my next post.
Sunday, October 21, 2012
Yarn + Old Glass Bottles
I really do not like throwing away empty glass bottles. I feel like there should be so many fun things out there that you can do with them. Recently, my collection of wine bottles started getting a little out of control so I started some hard core pinteresting and found something that seemed simple and fun... actually I found several different projects that look fun and I pinned them (http://pinterest.com/sweetlacy/crafty/).
Here is the project I did using clean empty glass bottles, some cheap yarn and a hot glue gun.
Here is the project I did using clean empty glass bottles, some cheap yarn and a hot glue gun.
I used a beer bottle, a wine bottle and a rum bottle, all different sizes.
Just the typical hot glue gun.
I found that it was easier starting at the top and working my way down.
It doesn't have to be perfect because you can fill in those holes later.
Use extra hot glue at the bottom to make sure the yarn doesn't start to unwind. Then just start going back up the bottle to fill in the gaps.
For this bottle, I added some black.
Also, wine helps the creative juices flow.
Here are the finished products. Different sizes, different looks. I might accent the solid bottles with the other color of yarn just because I really like how the little bottle looked. Otherwise, I think they look great!
Sunday, October 14, 2012
Cool Jewelry Cleaning Trick
This doesn't really have to do with painting but I haven't had much time for painting lately - hopefully that will change this afternoon. However, I did uncover a cool little trick a few weeks ago about cleaning silver and I thought I would share my success!
Now, beware, this only worked with my silver jewelry that has a higher silver content. Most of my other silver has a lower content and lower quality. On those, I was able to remove some of the tarnish but not all of it.
So, the science behind this is really cool - basically, when we wear our silver a lot, our oils from our skin protect it from the hydrogen sulfide that causes tarnish. Conversely, when we have silver that we don't wear often, hydrogen sulfide is able to chemically bond to our silver, forming a top layer of tarnish. Only the top bit of silver is affected and, from what I read, the tarnish can actually act as a barrier to protect the silver underneath from more harsh chemical reactions.
So, to remove tarnish, you simply ask the sulfur to bond to something more alluring... like aluminum!
Just follow these easy steps to clean your jewelry:
1. Line a dish with aluminum foil. Add about a teaspoon of baking soda to the bowl in the center of the dish. Add in your tarnished silver.
2. Bring water to a boil. Pour over silver and baking soda in aluminum lined dish. There will be some fizzing and, I'll warn you, it doesn't smell great.
Now, beware, this only worked with my silver jewelry that has a higher silver content. Most of my other silver has a lower content and lower quality. On those, I was able to remove some of the tarnish but not all of it.
So, the science behind this is really cool - basically, when we wear our silver a lot, our oils from our skin protect it from the hydrogen sulfide that causes tarnish. Conversely, when we have silver that we don't wear often, hydrogen sulfide is able to chemically bond to our silver, forming a top layer of tarnish. Only the top bit of silver is affected and, from what I read, the tarnish can actually act as a barrier to protect the silver underneath from more harsh chemical reactions.
So, to remove tarnish, you simply ask the sulfur to bond to something more alluring... like aluminum!
Just follow these easy steps to clean your jewelry:
1. Line a dish with aluminum foil. Add about a teaspoon of baking soda to the bowl in the center of the dish. Add in your tarnished silver.
2. Bring water to a boil. Pour over silver and baking soda in aluminum lined dish. There will be some fizzing and, I'll warn you, it doesn't smell great.
As you can see from this picture, the tarnish immediately starts bonding to the aluminum.
3. When the water cools, dry your silver with a paper towel - make sure to wipe all of it down as there is usually some baking soda residual. Use a polishing cloth to really bring out the shine.
Here are some before photos and photos of my silver after I dried it with a paper towel. I was very impressed!
These are earrings my mother gave me a few years ago. I think they are really pretty and I used to wear them pretty often but they are heavy. They became tarnished really quickly and I didn't know how to clean them so I haven't worn them in a long time!
And voila! All clean :)
Another little ring given to me by my mom.
All clean!
Clean silver!
Wednesday, October 3, 2012
Painting with Painting Knives: The Adventure Continues
I went home yesterday and spent the entire evening working on this painting. It took much longer than I thought it would but it ended up working out. I had a thought in my head of what I wanted it to look like. The only thing I couldn't clearly envision was the background so I winged that. If I paint it again I will probably try to do a different color in the background.
Regardless, I think it turned out pretty good!
It is somewhat abstract but I learned so much while painting this. I don't think I'll have another chance to paint until next week as we have quite a busy weekend coming up but I'm definitely excited for the next time!
Regardless, I think it turned out pretty good!
It is somewhat abstract but I learned so much while painting this. I don't think I'll have another chance to paint until next week as we have quite a busy weekend coming up but I'm definitely excited for the next time!
![]() |
| Flowers painted on 10/2/2012 |
Subscribe to:
Posts (Atom)





